Steam or water, it works the reverse of a fan, where the fan pushes air down, the turbine is turned by the steam or water. there's a shaft leading from the turbine to the generator, which produces the electricity
Oversimplifying it, steam is blown against the turbine blades, making the turbine rotate.
That would depend on the type and size of turbine.
it comes from steam
Yes,the mechanical energy of steam can turn the shaft of a generator thru the steam turbine in which the steam acts on its blade to produce rotational motion to transform mechanical energy. Yes, the mechanical energy of steam can turn the shaft of a generator thru steam turbine as the driver, because the steam will acts on the tubine blade to produce rotational motion to transform mechanical energy and elctrical energy as well.
It creates heat, heat boils water in closed boiler into pressurised steam, expanding pressurised steam drives steam turbine blades, steam turbine drives generator creating electricity, electricity powers metro system
The heat energy resulting from nuclear fission is used to produce steam that spins the turbine.
The Emergency Stop Valve (ESV) in a turbine is placed between the steam engine and the turbine structure. It is designed to rapidly close and prevent steam from reaching the turbine in case of emergency.
Coal is burned to make heat, and the heat is used to boil water, which produces steam, and the steam pressure is used to rotate a steam turbine, and the rotating turbine is used to generate electricity.
Steam or water, it works the reverse of a fan, where the fan pushes air down, the turbine is turned by the steam or water. there's a shaft leading from the turbine to the generator, which produces the electricity
Why extractions are taken out from steam turbine.
becouse this steam is use repetdly for the turbine
The preventive maintenance of steam turbine mainly entails frequent servicing of the parts. This will ensure a smooth performance of the steam turbine.
Rankine cycle is used in steam turbine
manish
The steam turbine blades to turn creates steam.The steam engine, steam piston Myllng after the turn brings.+++They are both steam-engines. The turbine is purely rotative; the reciprocating steam-engine uses cylinders and pistons.
turbine is considered there as a prime mover.this turbine will be driven bt STEAM OR HYDRAULIC OIL OR ELECTRICALLY so that when it is coupled with a pump it works creating a pressure or vaccum enough to pump the fluid.
why we are maintain vacuum in steam turbine at steam outlet or exhaust side
Steam turbine nozzle clearance is the total energy content available in steam. This is through a valve.