The main uses for packing steam in a turbine are to produce electricity and power. The steam creates pressure when in turn spins a turbine at very high rates of speed.
Firstly, vacuum is being created in turbine exhaust and condenser rather than being required. It is created to reduce the back-pressures and to improve the turbine efficiency. Also, with vacuum the designers can design large size last stage blades of LP turbine for maximizing the turbine output.
STEAM TURBINE is a machine for generating mechanical power in rotary motion from the energy of steam at temperature and pressure above that of an available sink. A turbine operated by highly pressurized steam directed against vanes on a rotor.HEAT ENGINE is a physical or theoretical device that converts thermal anergy to mechnical out put.....it converts heat energy into work.
Why extractions are taken out from steam turbine.
Rankine cycle is used in steam turbine
steam powers a turbine which drives a generator to produce electrical power
The main uses for packing steam in a turbine are to produce electricity and power. The steam creates pressure when in turn spins a turbine at very high rates of speed.
There's a boiler which produce steam. Steam drives/turns the turbine. The turbine is connected to the alternator rotor via a shaft. Turning the rotor then generate electricity.
They are used together to make hydroelectricity.
Technically a steam turbine is a particular type of steam engine. A classic steam engine usually refers to a reciprocating steam engine, which uses a piston and crank arrangement, where pressurised steam (from the boiler) forces the piston through its stroke, producing output power. A steam turbine produces power with pressurized steam expanding to high velocity, and impinging on turbine blades which produce rotational output power. A steam turbine can be considered similar to a windmill, although steam turbines typicaly rotate much faster, and often have many stages of steam expansion within a single machine.
Depends on the turbine
Yes
Coal is burned to produce heat, which then is transferred to water/steam, which produces mechanical power in the steam turbine, which produces electrical power from the generator
Coal is burned to produce heat, which then is transferred to water/steam, which produces mechanical power in the steam turbine, which produces electrical power from the generator
steam turbine
jacking oil is not required when stopping the steam turbine
Firstly, vacuum is being created in turbine exhaust and condenser rather than being required. It is created to reduce the back-pressures and to improve the turbine efficiency. Also, with vacuum the designers can design large size last stage blades of LP turbine for maximizing the turbine output.