0
A chlorine generator, also known as a salt generator, is an addition to a pool pump and filter system that converts salt to chlorine. It is another method of adding chlorine to a swimming pool. You will still need a filter, like sand, to filter dirt and debris from the swimming pool.
Wiki User
∙ 14y ago
Wiki User
∙ 14y agoYou don't have to change anything The only thing you have to do is make up your mind about the saltwater chlorinator you intend to use, fit it along the pipe according to instructions or better still get an expert to do it and then add salt to the water. the filtration equipment need not be changed.
Wiki User
∙ 11y agoI want to change my existing sand pool filter into a salt filter system, Is it possible? can I don this easily or have to change out the whole pump? By the way, i have a hayward system and my pool is 18x16 inground. thanks
Wiki User
∙ 11y agoNo. A sand filter will always be a sand filter. Salt will always be salt. A filter can never be turned into salt {;-).
I am assuming that you want to install a salt chlorinator system and you want to know if it is compatible with a sand filter. The answer is yes. However, a salt chlorinator will cost you more in the long run than continuing to buy plain old chlorine.
Add your answer:
Earn +20 pts
How do you change a vinyl inground chlorine sand filter pool to a salt?
Need to rephrase question.
How would you get back salt from a mixture of sand and salt?
Add water and stirr: salt is soluble, sand not. Filter the solution. On the filter re- main sand, in the solution salt. After repetitive evaporations you can obtain salt as crystals.
How do you separate sand and common salt?
Salt is soluble in water, sand is not soluble; filter the solution.
How do you separate a mixture of sand and salt powder?
1. Put the mixture in water and stir. 2. Salt is water soluble, sand not. 3. Filter the suspension: sand remain on the filter and the salt in solution.
How do you purify salt again after being dropped in sand?
Put the mixture in water and stir. After the dissolution of salt filter the solution; sand remain on the filter, salt pass in the solution.
When separing sand and salt why was the mixture filtrated?
Salt is soluble in water; after filtration sand remain on the filter.
How can common salt be separated from sand?
1. Put this mixture in water and stir. 2. Filter the suspension on paper filter or other type of filter. 3. The sand remain on the filter and the salt in the filtrate.
What are the steps you would take to separate sand and salt?
Add water and warm to dissolve the salt. Filter the whole solution to leave the sand. Rinse the sand and filter again. Evaporate the water off the salt solution.
Can you separate gravel and sand with a coffee filter?
As salt is soluble in water, mixing salt and sand in water would result in solid sand, and salt water. When poured through a coffee filter, the sand would remain in the filter, while the salt water would flow through. After letting the water evaporate, salt would remain. You will be left with the two separated solids.
What are materials used for separating salt and sand?
Water and a filter would work. Pour the salt/sand into water and the salt will dissolve. Pour the mixture into a filter and the sand will be trapped in the filter. Evaporate the water and the salt will remain.
Do you still need a sand filter with a salt water system?
no the salt will disolve....
How do you separate salt and sand from water?
Fist filter off or sink off the sand from water with dissolved salt. Then evaporate the water (by boiling off) from the solution, leavinfg the dry solid salt crystals.
