1. Turn off the engine 2. Open the Hood 3. Locate the head light/indicator assembly you need to work on 4. Remove the two retaining screws on top of the head light assembly 5. Pull head light assebly. 6. Locate indicator light (light closest to the fender) 7. Trun a 1/4 turn to the left and pull Bulb+socket out 8. Pull light bulb out of socket 9. Insert new light bulb 10. Turn ignition on 11. Turn on parking lights (check to see if they are on) 12. Turn on right blinker(check to see if its on) 13. Turn off ignition 14. Insert bulb+socket into assembly and 1/4 turn to the right 15. Push head light assembly back into mount 16. Replace both mounting screws 17. Check engine compartment for any loose debris 18. Close hood
== ==
how to remove rear struts on 2005 chevy cobalt
If it blinks fast either one of the two lights are burned out or the relay is failing
You remove the headlight to gain access to the back of the blinker housing, you can reach into the back of it and pull out the light and cable it's attached to. It's a pain.
With a 07 chevy cobalt key
where is the bcm located on a 2005 chevy cobalt
where is the bcm located on a 2005 chevy cobalt
I have a 2006 Chevy cobalt and there was a recall to replace the electric steering unit. Check to see if it was done first.
need to replace my front lower running / blinker bulb how do i do it
The Chevy Cobalt is the new official compact car in the Chevy family, replacing both the Cavalier and the Prizm. The Cobalt was replaced in 2010 by the new Chevy Cruze.
The Chevy Cobalt was first produced in 2005
2008 Chevy cobalt tpms reset