What I did was loosen off the motor mount on the left side, take a 2x4 wooden b lock place it on a floor jack and put under the oil pan and rase the engin enough so you can get you wrench on to the tention pully and change your belt.
Where can i find a serpentine belt diagram for a 1993 s-10 chevrolet blaze?
diagram for serpentine belt on 1996 Pontiac Bonneville se
you have too take the front motor mount loose and lift the engine to install it
if a serpentine belt is loose, it needs replacing. there is an automatic tension pulley on all serpentine belts. so just buy a new belt and install
Which belt? Timing or Serpentine? Serpentine is easy. Turn tension pulley with a breaker bar and pull belt off.
when the belt has no slack in it
I have a '92 PA Ultra. The Ultra has the supercharger. There are two sets of serpentine belts for this configuration.
A/C Condenser is on the serpentine route.
Your belt is either to big or just plain worn out.
There is no fan belt it is an electric fan. Are you referring to the serpentine belt?
Should be automatic through the spring loaded belt tensioner
2004 Lincoln town car belt diagram