0
If your tester is reading chlorine as red is your chlorine too high or too low and how might you fix the problem?
Wiki User
∙ 8y ago
I'd say that this means the chlorine level is far too high, based on recent experience. I diluted my pool water by letting 1/4 out and refilling it. The test sample still shows red but the sun is now burning off the chlorine and it seems to be reducing.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
How does reading relate to you?
Reading might relate to you because, in some books there might be a problem you have had experience with or there might be a accident or some kind of event that may have happened to you or your friend.
What are the hurdles that prevent people from reading?
they don't have books ,the language might also be a problem or they see no importance in reading.
Do I need a degree to get a job as a software tester?
It might be better to obtain a degree in the profession to get a career or job as a software tester. Unless you have a connection to getting hired on with becoming a tester. There may be some places that might hire non-experiences to non-degree experiences.
What is wrong with my dreams?
It is not possible to guess what the problem might be, or IF there is a problem without some information about the actual dreams. Dream interpretation is not psychic mind reading, but informed analysis.
Is my antifreeze tester broken The needle is pointing way too high off the chart.?
It might be broken depending on the tester, either that or you have straight coolant or water.
What is another 2 words for a addition problem?
If I'm reading the question correctly, you might consider; 1. Sum and 2.Total
The water taste salty, it is from greenshores utilities. we do not have a water softner. the utilities said they only add chlorine for treatment. what is the problem?
I would say in this case I believe that the problem might be that the water is coming from a nearby lake, and that is why the water tastes salty.
Which problem with reading historical sources is best illustrated by the Mayflower Compact?
It can sometimes be difficult to read the original texts. They are old and parts might be missing from them.
Under what conditions might one use a Seaward Pat Tester?
The conditions one might be in when using a Seaward Pat Tester are generally very serious because these situations leave to risk a potential electric shock that could be harmful or life threatening. Seaward Pat Tester's ensure potential safety hazards with electrical appliances are kept down.
What are the health issues with using chlorine?
You might turn into a pool
Your pool is cloudy and smells?
If the smell is a very strong Chlorine odor, your pool water has CHLORAMINES, also called COMBINED CHLORINE. A strong Chlorine odor is rarely caused by high levels of Chlorine in the water as everyone thinks. It is actually the exact opposite, there is not enough Chlorine being used in the water to properly sanitize and oxidize contaminents and swimmer waste. This is what leads swimmers to think they are allergic to Chlorine after swimming in a hotel or health club pool or spa that is not properly chlorinated. Chloramines will cause the eyes to burn and become very red, ( improper pH will also cause this same irritation ), the skin can become itchy and a rash may appear. Also irritation of the back of the throat is common and in some cases bathing suits can be discolored or stained. Bottom line is, cloudy water with a strong Chlorine odor is not safe to swim in. The strong odor is a warning that the Chlorine in the water is not sufficient to remove harmful waste and contaminants. The water must be properly tested for the following, Free Chlorine / Total Chlorine / Combined Chlorine / pH / Total Alkalininty / Calcium Hardness / Cyanuric Acid pH & Total Alkalininty must be balanced first. Then enough Chlorine Shock or Non-Chlorine Shock must be added to remove the Combined Chlorine ( Chloramines ). If using Chlorine Shock, you must add enough to the pool to bring the Free Chlorine reading up to a level that is TEN TIMES the test result of the Combined Chlorine Test. Example, Combined Chlorine test is 2.0 ppm, ( parts per million ), you must add enough Chlorine Shock to the pool water to bring the Free Chlorine test reading up to at least 20.0 ppm. The addition of the Chlorine Shock must be done all at once. If you do not acheive ten times the Combined Chlorine reading, also known as BREAKPOINT CHLORINATION, in one single dose of Chlorine Shock all added at the same time, the problem will only get worse. So be sure you have enough chemical on hand before you proceed. After 24 hours, if Breakpoint has been achieved. the water should be clear and the Free Chlorine test reading will drop back down to its original level. Using a Non-Chlorine Shock is easier and usually cheaper, not to mention safer to handle and store for the average homeowner. Simply follow the dosing directions on the package and your water will clear and the smell will disapate. This problem can be avoided by properly testing and balancing the water at least once a week. Any pool store will test your water, usually at no charge, if you bring them a sample from your pool or spa.
When to use the advantages of problem solving?
When facing a problem might be a good time!When facing a problem might be a good time!When facing a problem might be a good time!When facing a problem might be a good time!
