What would you like to do?
The 2001 Chevrolet Cavalier 2.2 liter engine drive belt diagram can be found in the owners manual. The belt diagram can also be obtained from most auto-parts stores, when you purchase the belt.
Was this answer useful?
Thanks for the feedback!
GOOYEAR BELTS HAVE A DIAGRAM ON THE BACK OF THERE PACKAGE Sometimes these diagrams can also be found under the hood of your car. In my 1990 cavalier this sticker was located …in the area where the serpentine belt goes on.
There is a belt tensioner wheel below the alternator pulley. Use a long box-end wrench to rotate the nut on the tensioner wheel CCW (as seen from the passenger side of the veh…icle). Using a tie-wrap, bungee cord, string or duct tape, hold the free end of the wrench (now under tension) by connecting it to any available bolt or metal object in the engine compartment. Now the old belt is loose and you have both hands free to remove the old belt and install the new belt. You may need to use a bright light to see what you are doing and a thin metal yard stick to push the belt around the bottom pulleys. When the belt is in place, free up the wrench and release the tension, then remove the wrench.
I think it has a serpentine belt,at least mine does You can put a 15mm wrench on the tensioner and pull it toward you, the belt will slide right off.
Get the Haynes/Chiltons manual. It should be there. Or go to the automotiveforums.com website.
If the old belt is still installed, make a quick sketch of the pulleys and the belt routing. Some vehicles have a routing diagram sticker under the hood. Some …belt sleeves (such as the GoodYear Gatorback) come with diagrams of the engines that particular belt fits. They aren't always perfect, but will get you close enough that you can figure it out. -J-Ri
Answer if its the same speed yes it should since the are both in the same generation. both the 98 and 01 have the same 3 and 4 speed trans.
The 2001 Chevy Cavalier 2.2 liter engine cylinder head bolt?ætorque specification is 120 pounds. The cylinder head bolts should be torqued in 40 pound intervals.
Yes, it should. The '01 2.2 liter OHV is the same one (with some minor updates over the years) as the one from '96 (think it was developed in '92-ish) it wasn't until '0…3 did Chevy change to the 2.2l DOHC Ecotec.
Yes the 2.2 liter 2001 Chevy Cavalier does have an interference engine. This means the valve and pistons share the same space in the engine.
will 2001 2.2 cavalier interchange engine parts with a 2000 cavalier
http://media.photobucket.com/image/2.2%2099%20cavalier%20belt/publicx/watermarkphp.jpg there ya go
It must have a TIMING CHAIN because Gates ( they make timing belts etc . ) does not list a timing belt for the 2001 Chev Cavalier 2.2 L
It must be a TIMING CHAIN because the Gates website ( they make timing belts etc. ) does not list a timing belt for the 2003 Chevy Cavalier 2.2 liter
Serpentine belts labels are being remove from cars and trucks by quick oil change company's. Like Jiffy lube
i need to know how to change an automatic transmission mount on a 2000 chevrolet
This diagram is under the hood. Look for it
When should you change a timing ChainI have a 2001 Chevy Cavalier 2.2 motor does it have a timing belt or chain?
Once you reach 100K you're running on or at the limit of life expectancy of the timing chain, chain tension-er, cam chain gear and crankshaft chain gear. All four should be re…placed as a set. You will also need to replace timing cover gasket and the crankshaft front cover seal. Cost of parts < $75.00 but not an easy job.