0
YES!
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Will the brake lights and turn signal work if a 2006 Chevrolet Cobalt engine is not running?
The only thing that will work with key OFF is the brake lights,head lights and emergency flashers. Dome light will also work.
What should I do when my 2000 Cirrus brake lights work when the headlights are off?
ummm... your brake lights should ALWAYS work whether your headlights are on or not, that's how people behind you know you are stopping.
What fuse controls the brake lights on a 92 Dodge Dakota. All lights and turn signals work except no brake lights when brake pedal is pushed?
Fuse 7 controls the brake lights. It should be a red 10amp fuse.
Why don't the brake lights work but the flashers and running lights work if the bulbs and fuses are good?
Please check the Brake light switch....The brake light switch should be located near or on the brake pedal (up on the stem of the brake pedal)
Can the brake lights not work and the night lights work same bulb?
my back brake lights don't work, but the brake light on the back door does what could be wrong
What fuse control the cruise control in a 2000 dodge stratus?
The cruise system shares fuses with the engine and brake lights. If the car runs and the brake lights work, it is not a fuse.
Brake lights don't work on 1994 Chevrolet diesel but the turning and clearance lights work?
You have a bad ground to the from the glow plug relay to the engine block
91 civic brake lights don't want to work after changing bulb and fuse what else should i look for?
If the bulb will not work the fuses under the dash should be checked. When these fuse fail the brake lights will not turn on.
Brake lights don't work when the brake is pushed. Work with headlights on only.?
The brake lights and the tail lights are separate circuits. Check the brake light fuse, then check the brake light bulbs, then check the brake light switch.
Why do your blinkers work but not your brake lights?
Blinkers can work without brake lights. Brake lights are activated by a switch that is switched by the brake petal and the turn signals are acivated by your turn signal switch on your steering column. The two are two separate circuits. I suggest you check out the switch on your brake pedal to see if it is working properly. It must have 12 volts applied to one side when it is not acitvated and 12 volts should be on both sides when it is activated. When the 12 volts is on both sides of the brake switch, it should apply 12 volts to your brake lights and then they should come on.
What would make your brake lights not work?
The most likely cause is a bad brake light switch (if none of the brake lights illuminate) but if its only one of the brake lights, try changing the bulb. Even if they still work as running or turn lights because they have a double filament and may still work partially, but not as brake lights.
What fuse controls the brake lights on 1976 Chevrolet Van All lights and turn signals work except no brake lights when brake pedal is pushed?
After fuse (should be labeled) Try bulbs and defective stop light switch
