Assuming you mean crank position sensor, it tells the ignition control module the position of the crankshaft so the module can tell the correct coil to fire at the correct time.
If its a 3.0 td model the crank sensor is situated on the o/s in the engine casing , its accesible from underneath with a long extension and a 10mm socket
the cam angle sensor is the crank angle sensor it preforms both jobs
The crank angle sensor is located in the distributor.only in the 94 and 95 Honda accord.
You adjust the timing by moving the crank angle sensor. The crank angle sensor is driven by the camshaft closest to the intake manifold (passenger side of the engine) and is located behind the cylinder head and valve cover. Losen the bolt that secures the crank angle sensor, in order to move the crank angle sensor.
Isuzu part number 8-97258-523-0(MSRP $193.86) crank sensor is on the right side(passenger) of the engine block, just behind the mount.
heyo captin jack
there is no crank sensor on a Mitsubishi 3000 gt but there is a crank angle sensor that looks just like a distributor its in the back of the engine on top between valve covers
around the optical lens
Crank angle sensor reads rpm and sends the signal to the ECU (computer) to aid in the calculation of engine rpm, ignition timing, fuel injection and crankshaft position.
Crank angle sensor
It is integrated in the distributor.
faulty crank angle sensor in most cases