0
It means that when the breaker is switched "ON" using the push button and simultaneously a fault occurs, the breaker will trip even if the push button is still being held in "ON" position.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What is inverse time-current characteristics?
In circuit breakers this feature will provide faster or slower responses for larger or smaller overcurrents, respectively. Ie Big overcurrents will trip quickly, and small overcurrents will allow more time before tripping. This is good as it allows overcurrents time to correct themselves (like when a refrigerator motor fires up there is a spike in current) without tripping and requiring attention; and larger overcurrents (faults) will trip quickly keeping the circuit safe from overloading, and say, catching fire.
For circuit breaker what does it mean by AF AT?
AF refers to the ampere rating of the breaker frame and AT refers to the breaker trip rating in amps. These are not breakers that you would find in your home but industrial molded case breakers. The current trips can be changed out to different values all within the same frame size.
What is the difference between MCB and MCCB?
MCB (Miniature Circuit Breaker)-rated current not more than 100 A. Trip characteristics normally not adjustable. Thermal or thermal-magnetic operation. Breakers illustrated above are in this category.MCCB (Molded Case Circuit Breaker)-rated current up to 2500 A. Thermal or thermal-magnetic operation. Trip current may be adjustable in larger ratings. MCB (Miniature Circuit Breaker)-rated current not more than 100 A. Trip characteristics normally not adjustable. Thermal or thermal-magnetic operation. Breakers illustrated above are in this category.MCCB (Molded Case Circuit Breaker)-rated current up to 2500 A. Thermal or thermal-magnetic operation. Trip current may be adjustable in larger ratings.from Manu anand
What is the meaning of 200AT-250AF in circuit breaker?
250AF refers to the ampere rating of the breaker frame and 200AT refers to the breaker trip rating in amps. These are not breakers that you would find in your home but industrial molded case breakers. The current trips can be changed out to different values all within the same frame size.
Restricted earth fault protection circuit?
Restricted earth fault protection is used to protect a specific zone, and should not trip for a fault outside of that zone (usually limited to a transformer, and possibly extending to lowside, highside, and tertiary breakers).
What does the trip free characteristic of a circuit breaker mean?
A trip free circuit breaker is one that will disconnect a circuit even if the manual switch is held at the "on" position. It is a safety feature to prevent a circuit breaker being disabled either deliberately or accidentally.
Can strong winds outside can trip the circuit breakers?
Strong winds can not trip a circuit breaker unless there is incorrect or loose wiring in your structure.
What is the function of an LBB relay?
A local breaker backup relay is used to check the operation of distribution circuit breakers and to trip the feeder circuit breaker if the distribution circuit breaker fails to trip on an overload.
Function of dc battery at substation?
Batteries are essential components in a substation. They provide the (tripping) current by which protective relays can trip high-voltage circuit breakers in the event of a fault. This means that the circuit breakers can trip even if the substation itself has lost its ancillary AC power supply.
What is the function of Batteries in the substation?
a very helpful functionAnswerBatteries are essential components in a substation. They provide the (tripping) current by which protective relays can trip high-voltage circuit breakers in the event of a fault. This means that the circuit breakers can trip even if the substation itself has lost its ancillary AC power supply.
What happens when two circuit breakers are parallel?
There are 3 cases in C.B. paralleling: 1. Both Circuit breakers of same current ratings with same time settings. 2. Both circuit breakers of different current ratings 3. Both Circuit breakers of same current ratings with different time settings. Case1: Any of the C.B.trips (depending on CT characteristics as no two CTs' can have same characteristics) Case 2. The one with lower current ratings would trip first. Case 3: The one with lower time settings would trip earlier.
Circuit breakers can be reset and used again?
Yes. In most cases, yes. If the circuit breaker continues to trip when there is no fault in the circuit, it may be failing and need to be replaced.
Can you use molded breakers instead shunt trip breakers for an Ansul fire suppression system?
Moulded breakers or shunt trip breakers - selection is defined by the current rating requirement.
How do circuit breakers work?
circuit breakers provide two basic forms of protection: overcurrent and short circuit The mechanism used on most simple breakers for overcurrent is a calibrated bimetalic strip > when it draws two much current it gets hot and bends the strip to trip a mechanical arm The mechanism used for short circuit is a electro-magnetic coil > when a fault current goes through the coil, it magnetically attracts a ferrous lever that trips a mechanical release Many larger breakers have electronic trips which monitor the above two functions plus others functions electronically, and a microprocessor then desides to trip the mechanical release
Electrician said that he would add 2 new circuits so that the breakers wouldn't trip. How do I know he actually did that if there wasn't any new circuit breakers installed in the panel?
He may have installed Tandem breakers. Tandem breakers allow you to fit 2 breakers into one standard breaker slot. They are slimmer in design to allow for this.
What are two methods used in most circuit breakers to protect electrical circuits?
There is a heated bimetallic strip that provides a time delay small overload protection. When its contact makes, it energizes a coil to trip the breaker. Some breakers are mechanical, though. There is a coil that trips the breaker instantly on large overload.
Why are circult breakers preferable to fuses?
It's not safer, but it is more convenient.
