Since The vectored Location of RST5.5 lie in Half the location of RST5 and RST6 so it is called RST 5.5(RST 5+1/2 )
Explanation:
Vector Interrrupt Vectored Location
RST 5 0028H
RST 5.5 002CH
RST 6 0030H
Now we add RST5 and RST6 vectored Location's
0028H + 0030H = 0058H
Now Devide The Sum by 2
0058H/2 = 002CH
Which is Vectored Location of RST 5.5.
This You can Check for All other vectored Interrupts TRAP(RST4.5), RST6.5, RST7.5
for 8085 Microprocessor
Thanks .............. S C Patidar
answer is = 55 becouze 11=11,22,33,44,(55) 5=5,10,15,20,25,30,35,40,45,50,(55)
Any of its factorrs which are: 1, 5, 11 and 55
it significance that the dog is GOD..
Trap is actually a software generated interrupt caused either by an error (for example division by zero, invalid memory access etc.), or by an specific request by an operating system service generated by a user program. Trap is sometimes called Exception. The hardware or software can generate these interrupts. When the interrupt or trap occurs, the hardware therefore, transfer control to the operating system which first preserves the current state of the system by saving the current CPU registers contents and program counter's value. after this, the focus shifts to the determination of which type of interrupt has occured. For each type of interrupt, separate segmants of code in the operating system determine what action should be taken and thus the system keeps on functioning by executing coputational instruction, I/O instruction, torage instruction etc.
Since 55 is a factor of 110, it is automatically the GCF.
"Interrupt" is a verb.
An interrupt vector is the memory address of an interrupt handler, or an index into an array called an interrupt vector table or dispatch table. Interrupt vector tables contain the memory addresses of interrupt handlers. When an interrupt is generated, the processor saves its execution state via a context switch, and begins execution of the interrupt handler at the interrupt vector.
"You should not interrupt class," the teacher scolded the boy.
RIM stands for read interrupt mask and SIM stands for set interrupt mask.The SIM instruction is used to copy the contents of the accumulator into the interrupt mask.The RIM instruction is used to interpret the RST interrupt positions.
In the 8086/8088, the interrupt vector table is the first 1024 bytes of memory. In the 8085, the interrupt vector table is the first 64 bytes of memory if using the RST form of interrupt, otherwise the interrupt vector is provided by the interrupting device, usually in the form of a CALL instruction. The interrupt handler is wherever the interrupt vector points to.
the prefix of interrupt is in
The prefix for interrupt is "inter-".
An interrupt is a hardware-generated change of flow within the system. An interrupt handler deals with the cause of the interrupt. Control is then returned to the interrupted context An interrupt is a hardware-generated change of flow within the system. An interrupt handler deals with the cause of the interrupt. Control is then returned to the interrupted context
There are 2 types interrupts in 8085 such as: 1)hardware interrupt 2)software interrupt
The verb of interruption is interrupt. For example "to interrupt someone or something".
"Please do not interrupt me while I am speaking in the meeting."
noun of interrupt,interruption interruptions,interrupts