The Intel 8085 is an 8 bit microprocessor created in 1977.
The Intel 8086 is a 16 bit microprocessor created in 1978. The 8086 was the first chip to start the x86 architecture family.
8085 contains 16-bit address bus and 8-bit data bus
8086 contains 20-bit address bus and 16-bit data bus..
In 8085 the clock speed is 3MHZ
where as in 8086 the clock speed is 5MHZ.
there are two differences btw 8085&8086
1. 8086 has 6 byte queue but 8085 has 4 byte queue
2. 8086 has 16 bit data bus where as 8085 has 8 bit data bus
The difference between the 8085 and 8085A microprocessor is that the 8085A is a bug-fixed version of the 8085A. The original 8085 was manufactured by Intel only before being quickly replaced with the 8085A.
The most significant difference between the Intel 8085 and 8086 microprocessors is that the 8085 is an 8-bit system and the 8086 is a 16-bit system. This difference allows the 8086 system to have a much larger set of operational instructions and can make calculations to more significant places. Note: the 8085 processor does have two 16-bit registers. The pointer and the program counter.
Comparision between motorola6800 And Intel 8086
a number (1) because 8085+1=8086
Intel 8279 is a Keyboard/ Display interface which was basically developed for 8085/8086 microprocessors.l
Intel named the 8085 after the 8080. The 5 means it runs on a single +5V power supply, as opposed to the 8080 which needed +5V, -5V, and +12V. The predecessors of the 8085 were the 8080, 8008, 4040, and 4004. Intel named the 8086/8088 after the 8085. It was considered the logical continuation of the 8085 family, but as a true 16-bit processor. The 8086 is a 16-bit computer running on a 16-bit bus. The 8088 is the same 16-bit computer, but it runs on an 8-bit bus, and it was the heart of the first IBM PC.
The data bus of 8085 is 8 bit.Its operating frequency is 3.03 Mhz.Address bus is 16 bit. The data bus of 8086 is 16 bit.Its operating sfrequency is 5 MHZ.Address bus is 20 bit.
The 8085 and 8086/8088 operate on 5 volts.
Windows does run on an Intel processor. It just does not run on an 8085. It requires an 8086/8088 (Windows 3.1) or 80386 (Higher versions) to run.
No. The 8086 has instructions not present in the 8085. The 8086 was marketed as "source compatible" with the 8085, meaning that there was a translator program which could convert assembly language code for the 8085 into assembly language code for the 8086. However, this does not mean that the compiled 8086 assembly code would then run on an 8085; among other things, the 8086 was a true 16-bit processor, as opposed to the 8085 which was an 8-bit processor that supported a few 16-bit operations.
"The x86 architecture first appeared as the Intel 8086 CPU released in 1978, a fully 16-bit design based on the earlier Intel 8085. Although not binary compatible, it was designed to allow assembly language programs written for the 8085 to be mechanically translated into the equivalent 8086 assembly. " Here's the entire Article: http://en.wikipedia.org/wiki/X86
The major difference between the 8085 and the 8086/8088 is that the 8085 is an 8 bit computer, and the 8086/8088 is a 16 bit computer.
85 is a 8 bit processor,number of flags are 5 and memory capacity is 64KB while 86 is a 16 bit processor ,number of flags are 9 and memory capacity is 1 MB.The main difference between 8085 and 8086 is that 8086 uses pipelining.