Any brand of brake fluid will be fine. as long as it is DOT3
You put brake fluid for the clutch master cylinder
There is no fluid in the clutch....The clutch master cylinder takes DOT 3 brake fluid. It is the same fluid that you put into the brake master cylinder
D.O.T. 3, it will be printed on the master cylinder reservoir cap.
pop the hood. on the drivers side firewall there is a white container with a black cap. that is your master cylinder reservoir. there is a full mark on the side of it. fill with appropriate fluid. the cap should tell you what kind to use.
DOT 3 brake fluid as listed on the master cylinder fill cap.
DOT 3. It is written right on top of the master cylinder fill cap.
More than likely DOT3. If you will look on the top of the Master Cylinder cap, you will find the proper fluid listed.
More than likely DOT3. The correct fluid is listed in your owner's manual and on the top of the master cylinder cap.
It is DOT3. It is listed in your owner's manual and on top of the master cylinder fill cap.
Sure. Sometimes it's integral to the master cylinder. But some master cylinders have a separate brake fluid reservoir that is connected by either a fluid tube or fit into an "O" ring seal on the master cylinder. You need to find out what kind you have and what you'll need to replace it. If you can't find a replacement master cylinder reservoir any other place, you'll need to get one either from a dealer or a wrecking yard.
More than likely DOT3. Look on the top of the master cylinder fill cap. It is listed there.
The brake fluid master-cylinder cap usually specifies the correct type brake fluid for the vehicle. It is embossed in the warning statement on the cap. If the vehicle's master=cylinder cap does not have a warning statement there is usually a label near the cap that details the brake fluid information. The information is also typically in the owners manual under fluids and maintenance. I believe this vehicle should use DOT 3 brake fluid.