Take a look at the water pump that is currently on the engine. if its close to the timing chain cover its short, if its approx. two inches away from it its long.
year the 283 engine was made and year production was stoped on this engine
No, Ford has never built a 283. The 283 is a Chevy engine.
The Chevy 283 engine has the standard bellhousing configuration and is compatible with transmissions that bolt to first generation small blocks. The automatic TH350 transmission will fit the 283 engine.
Busted diaphragm in the fuel pump. Replace the fuel pump to solve this problem. Can also be a carburetor problem such as a leaking needle valve and seat or a pinhole in the carburetor float. This would require disassembly and rebuilding the carburetor.
A bare 283 Chevy engine block with no heads or rotating assembly, aprox 150 lbs.
http://www.classiccarauto.com/impala/how_to/images/distributor.png
Depending on what side of the engine the alternator is located in the exhaust manifold or header there are two holes for a bracket that looks like the letter capital e with the top missing the other a hockey stick with a slot for adjustment the other end to the water pump
Yes it will fit. An optional engine this year was the 305 V8, so the 283 will easily fit with major modifications.
how to remove a 1966 283 engine from a Nova
On a non-TBI engine, Yes.
They were a small block V8.
283 SBC Corvette