There Are Several Links Where You Can Find Instructions for Connecting an Xbox 360 to a Television Using an HDMI Cable but the Best Route Would Be to Search This on You Tube. You Tube Not Only Has the Instructions but Shows the Process.
The way to connect your computer to your TV varies depending on your equipment. Most modern computers, laptops, and televisions can be interfaced using a single HDMI cable. Specific instructions on this process can be found at About, eHow, and WikiHow.
The purpose of using a coaxial splitter is so that one can connect more than one device to a single coaxial line. For instance connecting two TV's to one coaxial line for cable television.
Your best bet is to buy an HDTV (if you haven't already) and then buy an HDMI cable, and also a component cable hookup for you in able to connect your Wii using the HDMI cable. Otherwise, USB cable won't do.
using a/v cables and connecting them color coordinatingly.
Cable TV
Get a monitor with an HDMI or analog input and connect it to a cable TV tuner.
yes
The answer to this question depends upon what type receiver, TV, and cable you are using between the receiver to your TV. Depending upon which cable is used, the TV would be on channel 3 or 4 if using a coax cable (screws on), and input setting with an RCA (yellow, white, and red) cable, component (green, blue, red, white, red) cable, or an HDMI cable. See which type cable you have going from the receiver to the TV and then try the channels or the input settings with your TV remote.
A DSL (Digital Subscriber Line) is a telephone line that carries digital data from end to end, and can be leased from the telephone company for individual use. Telephone technology. Broadband refers to a networking technology that carries more than one type of signal such as DSL and telephone.
Sometimes this will happen if you are using a coaxial cable on the antenna and there is a broken connector or even a cut in the cable somewhere.
Depending upon the type receiver you have, 3 options are available for connecting the receiver to your TV. With the VIP 211, 211k, 222, 612 receivers, you can use a coax, RCA, component or HDMI cable to connect to your TV; HDMI giving you the highest quality picture if you have HD programming. The VIP 222k, 622, 722, 722k, and 922 receivers allow you to use RCA, component or HDMI cable (K series receivers and 922 have a coax port with OTA module installed). All other receivers can use the coax or RCA cables. Connect the type cable you have from your receiver to your TV. If you are using a coax cable, place your TV on channel 3 or 4. Any other type cable, you place your TV on an Input setting - HDMI for HDMI cable; comp for component cable; or Vid, AV, etc. for RCA cable.
Just as with television or satellite , this is to transmit video signals