Hi, I own a '56 OLds 98 It is rather unconfortable but not difficult. Get your head in the front left wheel well and look just over the chassis and below the steering column. There is a metal circle like a 1 in. diameter ring that is attached to a dipstick. Turn it counter clockwise as if to unscrew it (it is threaded in) and lift it out. You add brake fluid through this hole and then screw the dipstick back on. Hope this helps. Israel Delgado idelgado@totalbank.com
You put the brake fluid inside the brake master cylinder
To put brake fluid in a 1997 Ford Explorer, you must locate the brake fluid reservoir. Once you locate it, unscrew the cap, and replenish the brake fluid.
you put the brake fluid inside the master cylinder
in the brake fluid bottle. >:D
The brake fluid reservoir
The brake fluid in a 1992 Ford Escort gets put in the brake fluid reservoir. This is normally located on the master cylinder.
You get brake fluid that will cause tooth decay
you open the cap that says brake fluid, and then you pour it in
You put brake fluid in the brake fluid reservoir on a 1998 Dodge Stratus. This is located on the master cylinder, under the hood, on the driver's side.
It uses brake fluid in the brake fluid reservoir. The clutch fluid (brake fluid) is fed by the brake fluid reservoir. The clutch fluid reservoir is just beneath the brake fluid reservoir. So, add fluid to the brake fluid reservoir to fill the clutch fluid, also.
Put trans. fluid in through the dipstick hole, be careful not to overfill
DOT 3 Brake Fluid