you add coolant to e150 thru the radiator overflow bottle
figure out the capacity and then mix 50/50 anti freeze and water
Yes. as long as it is distilled water tough.
Yes, you would put the water in the reservoir.
when you open the bonnet on the left side you will see a white bottle. You can put coolant for the radiator in it.
You don't put water in your radiator, you put antifreeze.
In a 2002 Ford E-150 : The thread on cap on the engine coolant reservoir is the pressure cap / radiator cap ( so with the engine cool you add antifreeze and preferably distilled water into the engine coolant reservoir ) It came from the factory with a 50 / 50 mix of distilled water and the correct type of antifreeze for the vehicle , Ford states not to exceed 60% antifreeze in the mix
No. Let it cool down before you open the radiator cap and then put water in the radiator
Ford vehicles come from the factory with a 50 / 50 mixture of antifreeze and distilled water
Hillbilly way open the drain plug on bottom of radiator (make shure the vehicle has not been ran before you do this ) open radiator cap put garden hose in it start it let run about 20 min
Follow the upper radiator hose, when installing the new thermostat be sure to put the temperature portion towards the engine block
Water
Yes, 1987 to 1996 interchange.