0
RF tire, lower belt shield, accessory belts, crank pulley, ps pump, AC lines, right engine mounts, right engine mount bracket, outer timing cover.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you remove the oil pump on a 1997 Camry 4-cylinder?
You have to remove the alternator, driving belts (serpentine belt, stirring pump belt). After that remove the engine mount on the passenger side of the car (do not forget to put something underneath the engine before removing the mount). After that you need remove the upper timing belt cover. Remove the crankshaft pulley and lower timing belt cover. Put the marks on the timing belt. Loosen the timing belt pulley, stretch the spring, and tighten the timing belt pulley. Remove the timing belt. After this you get access to the oil pump, which is going around the crankshaft and has dozen of bolts to remove. PS: Before you start make sure you have to gasket because they are not reusable.
Change timing belt on 99 Kia Sephia?
open the hood left facing side has black cover remove upper and lower covers remove timing belt put back in time start car
How can you tell if timing off if the belt is loose but not broke 1990 acura ls?
Remove valve cover, then remove the side time belt cover. Check timing belt tension. If there's too much slack, loosen timing belt tensioner, put pressure against side of tensioner with long screwdriver, then tighten the tensioner bolt.
How do you replace timing belt on Hyundai excel 1992 model?
remove right tire, unbolt the power steering pump, go underneat unbolt the alternators damper, remove the timing belt tensor, remove the old belt, put the new belt on and repeat the process backward... it can take between 45-1:30 hour to do this.
Change timing belt on 1999 elantra?
disconnect negative battery cable rotate the engine in the normal direction of rotation(clockwise)until the no.1 is TDC remove the accessory drivebelt, then put a jack under the engine to support it and remove the engine mount so itllbe out of the way, then loosen the water pump pulley bolts and then remove the water pump pulley using a chain wrench or a strap wrench to hold the crankshaft pulley,loosen the crank pulley bolt and then remove the pulley bolt and the crank pulley.Make sure that you dont move the No.1 cylinder from TDC while loosening the crank pulley bolt.After removing the crankshaft pulley remove the timing belt retainer/guide flange remove the 4 upper timing belt cover bolts and then remove the upper timing belt cover.Remove the lower timing belt cover bolts make sure that the timing belt camshaft sprocket timing marks are aligned with the top of the cylinder head if your planning to re-use the timing belt put a directional arrow indicating the normal clockwise direction of rotation on the belt remove the timing belt tensioner pulley bolt and then remove the tensioner pulley remove the timing belt remove the timing belt idler pulley bolt and then remove the idler pulley if the camshaft sprocket is damaged or must be removed to replace the camshaft seal or to strip the cylinder head for overhaul use a wrench to hold the cramshaft in place and then remove the sprocket retaining bolt.Then remove the camshaft sprocket from the end of the camshaft remove the crankshaft tioming belt sprocket
How do you change the timing belt on a 1996 Hyundai Elantra?
disconnect negative battery cable rotate the engine in the normal direction of rotation(clockwise)until the no.1 is TDC remove the accessory drivebelt loosen the water pump pulley bolts and then remove the water pump pulley using a chain wrench or a strap wrench to hold the crankshaft pulley,loosen the crank pulley bolt and then remove the pulley bolt and the crank pulley.Make sure that you dont move the No.1 cylinder from TDC while loosening the crank pulley bolt.After removing the crankshaft pulley remove the timing belt retainer/guide flange remove the 4 upper timing belt cover bolts and then remove the upper timing belt cover.Remove the lower timing belt cover bolts make sure that the timing belt camshaft sprocket timing marks are aligned with the top of the cylinder head if your planning to re-use the timing belt put a directional arrow indicating the normal clockwise direction of rotation on the belt remove the timing belt tensioner pulley bolt and then remove the tensioner pulley remove the timing belt remove the timing belt idler pulley bolt and then remove the idler pulley if the camshaft sprocket is damaged or must be removed to replace the camshaft seal or to strip the cylinder head for overhaul use a wrench to hold the cramshaft in place and then remove the sprocket retaining bolt.Then remove the camshaft sprocket from the end of the camshaft remove the crankshaft tioming belt sprocket
How do you replace a Subaru Outback front crankshaft seal?
It's a big job. You have to remove alternator and air cond. belts. Remove crankshaft pulley, then remove timing belt assembly cover, then remove timing belt, then pull out crank sprocket. After that you get the old crankshaft seal out and put in new one. Put then everything back in reverse order. Done.
How do you replace the water pump on a 2000 Mazda Protege?
You have to take off the serpentine belts so that you can remove the pulley for the water pump. You also have to take off the cam head so that you can get to the timing belt case and remove the plastic splash guards in front of the water pump. Remove the timing belt, then there are 4 bolts attaching the water pump. Remove those bolts and then disconnect the water intake and put your new pump in and replace the timing belt. **Make sure that your timing marks are located where they need to be before replacing the timing belt.**
Put timing belt in1996 Honda Accord?
have take motor and trans out 1996 Honda accord put timing belt
How do I change the timing belt on a Hyundai Tucson 2.0?
You must first access the timing belt by removing the drive belts and timing cover. Then put the motor on TDC, lock the cams down, remove the tensioner and then the t-belt. Re-install the new belt, new tensioner, remove the locking pin for the tensioner, unlock the cams, and rotated the engine to ensure everything stays lined up.
How can you put your timing belt your 1998 ford expedition motor5.04?
That engine doesn't use a timing belt.
How do you put on the timing belt to a 1989 dodge Aries?
remove crank balancer pulley hub after the beltremove any thing in front of timing coverremove timing coverremove timing belt and idler and tensioner pulliesreplace all parts with newdo google search on how to align cam sprocket and crank sprocket and how to set belt tensionalign marks before belt removal and replacement
