Could very well be the spark plugs or possibly fuel injectors. I had the same problem and it was the spark plugs. check for dead spots in your tps. also check that the resistance in your airflow meter is consistant.
faulty throttle position sensor?
Your timing could be off.
The vehicle would stall when put in gear would be the fuel pump. The fuel pump is very weak which would explain why in neutral the vehicle starts if it gear it would have to have more gas.
The Chevy 2500 HD Duramax would stall out at 200 RPM because of mechanical failures. The mechanical failure will make it not operate at its optimum.?æ
Is it low on Anti-Freeze? That is a known issue for a car to stall!
Could use more info but, a plugged fuel filter could do that.
Shift selinoid 30 dollars at auto zone
Scott Sheeler has written: 'The Datsun roadster book' -- subject(s): Datsun 1600, Datsun 2000, Fair Lady, Fair Lady automobile, Fairlady, Handbooks, manuals, History, Maintenance and repiar, SPL311, SRL311, Maintenance and repair
Yes it is, it was the motor put in from '67 to '70
The first thing I would try would be cleaning the throttle body with some carb and choke cleaner. When they get really dirty it can cause you to stall at slow speeds. On my 93 there is a Crank Shaft Position sensor. Mine started to melt and the jeep stalled at weired times for a week. If your jeep has a lock up solenoid in your tranny and its stuck on, then you will stall at stops Not sure about a 94, but my 2000 would stall while driving at highway speeds. Dealer replaced the oxygen sensor and it fixed the problem.
A serious vacuum leak could cause that.
bad gas