More than likely its your battery. If you unbolt it and take to just about any automotive parts store, they can tell you if your battery is dead or not.
Check stop light fuse Check bulbs double filamented smaller for brake lights Check the operation of the stop light switch Check socket for corrosion
Your 2000 Chevy pickup truck is 14 years old as of 2014.
the dash and radio lights are supposed to dim when the headlights come on. Make sure you have the brightness of the dash lights turned up as much as possible.
The 2000 LS1, being the first year of the L-series, has had quite a few minor problems like that. That is caused by some of the wiring being chafed, and Saturn issued a recall in 2003 to fix this, and a few other problems with the car. The problem with the lights and blinker usually only occurs if you live in a humid area.
You should clarify your problem or question. Is it the front or rear signal light? Is the tail light coming on with the signal light? Are none of the lights coming on at all?
Warning lights are important to pay attention to and know warning lights. If seat belt lights flash, and an air bag light flash, it means there are problems with both parts.
no 84 and 85 change out.
Lights Camera War - 2000 was released on: USA: 6 April 2000
Flickering Lights was created in 2000.
You probably need to replace your brake light switch. It's near the top of the brake assembly, beyond a trim panel. The fact that all three brake lights don't work rules out problems in the multifunction switch (the cause of similar problems affecting only the two rear lights.)
Try replacing the hazard lights switch. 40 bucks at dealership for the part, require no tools to replace.
On a 2000 Dodge Ram, "no bus" means the communication network between modules has quit working. Any module on the network or the wiring between them can be the cause of the malfunction.