On a 2000 Dodge Ram, "no bus" means the communication network between modules has quit working. Any module on the network or the wiring between them can be the cause of the malfunction.
There's a solinoid in the transmission.Suggest to check that first. Turn on interior lights. Start engine. If the lights go out when the engine stalls, you have a bad ignition switch.
belt is loose.
Why engine stalls on 1993 Chrysler Intrepid while driving and sometimes at stops?
I had a 1995 Dodge Ram Pickup that did the same thing - it was a blockage in the catalytic converter
The engine stops.
Check for vacuum leaks.
The light comes on when the car stalls because the engine is not running and the pump therefore is not pumping. The pressure will always be 0 when the engine stalls and the light is directly related to pressure. This is normal, you have no problem, other than the engine stalling.
The idle speed needs adjusted upward if an engine stalls when you take your foot off the accelerator while stopping or turning.
If a car engine stalls when turning, there could be a problem with the power steering pump. There could also be an issue with an emissions control device.
i have a 2000 dodge work van 318 engine when i start in the morning it stalls several times until it warms up then ok
yOU Need a new alternator.
clutch switch is bad