Install a manual gauge to actually read oil pressure
It's oil level or pressure. If level ok, pressure test.
changed battery engine light stays on
i just changed my batterys out on my truck now my check engine light is on?
Install a manual gauge to check actual pressure or try Replacing oil sending unit
The oil pressure light can not be reset. The cause of it being on must be repaired. It stays in when the oil pressure is low or there is a sensor malfunction.
no. speed of light is always constant . as long as the light stays in the same medium. the speed is generally slightly different in different media.
The light should reset itself after all 5 tires are at the correct pressure. Yes, you have to do the spare tire too. If the light stays on after pressures have been corrected, you need to contact your dealer. The light should reset itself after all 5 tires are at the correct pressure. Yes, you have to do the spare tire too. If the light stays on after pressures have been corrected, you need to contact your dealer.
You need to remove the oil pressure sensor(on the back of the block) and install a manual gauge and check the pressure. Should be at least 15 psi at idle. If pressure is ok, the sensor has failed.
The red brake warning light is an indication of low fluid, a loss of pressure, or the parking brake being set.The red brake light stays on when the parking brake is set, the fluid is low, or there us a loss of pressure.
Came up to a stop light and when the light changed the car would not move.
Im not a mechanic .... but it could be a faulty sensor ....
The oil light will always come on for just a second after a car is started. If the oil light stays on, the oil could be low or need to be changed.