0
Depending on how much hp, new mounts, fans, fuel system, tank, tranny, rear end, trans cooler, and possibly hood. About 6-10k for 600-650 hp
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you swap a 1989 350 engine in a 1989 Chevy CK1500 2WD pickup?
easy, take out the old engine, and put in the 350. it really is that simple.
Can a 1991 Chevy G20 van motor fit into a 1987 Chevy caprice?
the g20 should be a 350 and I believe the caprice is a 305 you can swap the engines but you will also probably have to swap the intake and exhaust manifolds
Can you swap a 1989 caprice motor and trans with a 350 and 700r transmission?
Sure, with some modifications.
Can you swap a 1994 tbi for a 1989 tpi in a 94 Chevy truck?
YES, That would be a direct bolt in with NO problems. EVEN SWAP
Would a 3400 engine be a good engine swap for a 89 Chevy Z24?
Yes it is and its the easyest to do.
What years do parts swap for 1997 sidekick?
Body panels- 1989-2006, 1989-1998 geo/chevy tracker
What do you need to swap a 350 Chevy engine into a1988 Chevy pick-up with a 305 Chevy engine?
As long as the 350 is a fuel injected engine / TBI / Throttle Body Injection engine there is NO difference.
Will the engine from a 1994 Chevy 1500 interchange with a 1988 Chevy 1500?
If the cubic inch is the same the motors should swap out ok. You will have to change some parts but most Chevy motors will swap.
Can a 1989 bronco 302 engine swap into a 1995 F150 302?
sure can!
Can a transmission from a 96 Chevy Impala ss fit in a 92 caprice What changes have to be made?
That is the 4l60 or 700r4 there should not be a swap issue if the 92 had overdrive.
Can you swap out the 454 engine in a 1994 Chevy Cheyene with a 350?
yes you can swap the 454 for the 350 its compatible usually any Chevy engine will match in the same vehicle might have to do sum fabrication but in ur situation you should be fine
Engine swap cavalier 2.2 1997 for 2000?
You can swap the engine from your 1997 Cavalier 2.2 liter engine to your 2000 Chevy Cavalier. The wiring harness and motor mounts should be in exactly the same.
