7 to 9 ft lbs
The specs are in your manual.
1403 is the official spec on the 88" engine.
Big bolts first 20-22 ft-lbs small bolts 98-120 in-lbs
Folowing torque sequence its 10 to 15 foot pounds then 17 to 19 foot pounds then each nut a full quarter turn.
45lb.ft.
Needs to be check so that he clutch engages smoothly. It being out of spec. is caused by excessive heat from a slipping clutch.
55 to 60 foot pounds.
what is the tork spec for set screw on center support reverse clutch drum
to remove the clutch from the flywheel u will 9mm 12 point make sure when u put the clutch or flywheel u torgue it down to vw spec.
whats the torque spec for the pressure plate on a 1998 kia sportage?
need to know which engine you have