Probably the multi function switch, which is the turn signal stalk, probably has to be replaced, it's all incorporated in that stalk and if you do the work yourself the part is around $55.00.
If it's not the fuse then it's the multi-function switch (the turn signal stalk) that went dead on you.
Often, a separate flasher unit is used to activate the hazard flashers. This unit might be bad, or the switch to activate the hazard flashers might be bad. answer always there are 2 flashers.one for turn signals other for hazard replace hazard flasher They have separate fuses also.
There are two different flashers on vehicles. 1 for the turn signals, 1 for the hazard flashers.
Hazard and turn signals usually use separate flashers, switch the flashers to see if turn signals work and hazards don't, if so replace the flasher you need to replace the blinker flasher unit it is different from the hazard unit they cost about 4 bucks the flasher unit is the big round thing in the fuse panel in the dashboard
hazards and turn signals have separate flashers. replace flasher for turn signals
There are two flashers, one for the hazards and one for the signals.
yes
Probably turn signal flasher
Double check the wiring diagrams for your vehicle but it's probable the flashers and signals use the same relay to function. The wiring for your flashers will go through the hazard switch which is where the malfunction is. If you replace the switch your problem should be solved.
On a 2010 Lincoln MKX : Look on the dash by the radio . There should be a button with a triangle symbol on it . Push that button to turn on the 4 way hazard flashers ( push again to turn off the flashers )
Flasher relay bad. This is a separate flasher relay from the one controlling the hazard lights.
check the turn signal flasher unit itself, believe turn and emergency flasher are the same on the camery. good luck