0
Could be the ASD Relay (Auto ShutDown). If that's not working it can cut power to the coil, just switch the ASD Relay and replace it with the Horn Relay and see if that restores power, if so just go and get a new ASD Relay.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What causes no power to coil pack in 98 dodge stratus?
What causes no power to coil pack in 1998 dodge stratus ?
Where is the tach wire at the coil pack on a 1994 dodge avenger?
The Avenger did not exist as a 1994 model.
1990 Dodge Spirit will not start. No spark. Have replaced ignition coil pickup coildistributorplugswiresrotor. Any ideas?
Did you check to see if the coil was receiving any power? If its not it might be a bad wire, or possibly the ASD Relay.
How do you find a tach wire in a 1994 Dodge Colt?
You will have to find the coil first.
1991 Dodge Dakota that won't START - I have already replaced the pick-up in the distributor and coil and coil wire you have power to the coil but there is not power coming out of the coil - help?
Replace the ECU.
Where is coil located on 92 dodge spirit 4-cylinder?
It bolts to the same bolts as the thermostat housing.
1994 Pontiac gran am lose power?
coil pack
What is the Resistance specification of the ignition coil on a 91 dodge spirit?
there are 8 diffrent coils with 2.5 n/a, 1 coil for the 2.2 turbo dohc, and 1 coil for the 3.0 v6. what do you have?? 3.0
On a 91 dodge spirit 4-cylinder the center wire from distributor goes to what?
the coil which is bolted to the thermostat housing
Where is the fuel pump relay switch on a 1994 Dodge Spirit?
Are you sure its the relay... Does the car receive spark... if not it might be the ASD Relay located on the finder, under the hood next to the battery, its the last relay there.... the ASD Relay sends power to both coil and fuel pump, if its bad it will cause both not to work.
1994 ply sundance no power to coil?
check the ASD relay
88 dodge 150 van won't start .no power at coil changed pickup coil in distributor and coil still no power at coil. reccomendations?
check the two relays mounted on the firewall right in front of the driver side.
