Hi, I just wanted to add more information on this problem. The truck will not start, and the check engine light is on. I tried to use a scan tool, and it did not find any fault codes, but the light is still on. This problem cane after I changed the MAF, MAP, TPS, EGR and the fuel pump. I have reinstalled the old components, except the fuel pump. I checked to see if I am getting spark and fuel pressure. The spark seems weak, and I have no fuel pressure. I read in the manual the the oil pressure switch can cause a fault that shuts off the fuel pump, but not sure how to verify that. I checked the fuel pump relay and it appears to be OK, and there I think there is power to the relay, since there are 3 relays side by side, I don't know which on is for the fuel pump. Any ideas would be appreciated. Thanks. I have tracked down one problem to the fuel pump, no I lose ignition power after a second or two. Any ideas? Thanks.
How do you reset check engine light for the 2009 Chevy trail blazer?
Check for vacuum leaks.
The computer has detected a fault with the emissions controls. Have the computer scanned and this will help to find the defective part or parts.
Check the motor mounts.
Random cylinder misfire
If the check engine light is blinking that means an engine cylinder misfire has been detected
The check engine light (service engine soon) comes on and stays on when a problem is detected by the self diagnosis system of your vehicle.
Check the engine thermostat. Its probably stuck open.
The check engine light comes on and stays on when a problem is detected by the self diagnosis system of your vehicle. Generally, a check engine light is lit when there is a problem in the emissions or somthing that is affecting the effectiveness of the emissions. If the check engine light is flashing a misfire has been detected
Bulb may be blown or has been removed.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
The check engine light is triggered by the Engine Control Module (ECM). The ECM receives information from many sensors and determines when to illuminate the check engine light.