If you have the 4.3L engine the required fuel pressure would be 60 to 66 psi. If you have the 2.2L engine the required fuel pressure would be 41 to 47 psi.
what is the fuel capacity of a 1998 chevy s-10 pick up
Could be,faulty fuel pump, bad wire harness connections, dirty/plugged fuel filter, Faulty fuel pressure regulator, contaminated fuel (water),
Fuel pressure for a 1997 Chevy S10 with a 4.3L engine requires 60 to 66 psi.
No the fuel pressures are different 95 wasw about 10 psi 1998 is 60 psi . u need 2 change fuel pump
The tank pressure sensor is usually located on the top of the fuel pump assembly.
The fuel pressure regulator would be located in the throttle body in 1989.
s-10 fuel pressure releifOn later models, loosen gas cap. s-10 fuel pressure releifOn later models, loosen gas cap. If the vehicle is fuel injected you can pull the fuel pump fuse or relay while the vehicle is running. It will run until the pressure has dropped.
Most fuel pumps on fuel-injected (high pressure fuel system) vehicles are located in the gas tank. The fuel submerges the pump and helps keep the pump cool. Excess heat will kill an electric fuel pump pretty quick.
41 to 47 psi.
The 1985 Chevrolet S 10 blazer fuel pressure regulator can be found on the top of the engine. The fuel pressure regulator will be near the fuel injector pump.
A fuel pressure regulator on a 4.3L can leak undetected but cause the vehicle to fail emissions.