The license plate bulb on a 1998 Buick LeSabre is replaced by removing the retaining screws and disconnecting the wiring harness. The bulb can then be twisted from the socket and a new bulb installed.
A Buick Century License Plate Bulb replacement can be done at home. You can go to any auto store to purchase the replacement part. Replacement can also be done at dealerships if needed.
The license plate bulb on a 2005 Buick LeSabre is replaced by unscrewing the bulb cover and twisting the bulb. A new bulb can then be installed before putting the cover back in place.
Take it to a Buick Dealership
You must remove the entire tailight panel - remove trunk liner and the recessed nuts.
If you can not remove fasteners on outside, you may need to cut a section out of the inside of trunk to get your hand by the bulbs.
how do you change the rear license plate light on a 1999 Buick Regal
How do you replace the light bulb over the number plate in a 2002/2004 Buick LeSabre ? Thanks, Henry Aubut - 19460 Bermuda court, no. fort Myers, fl (239) 731-0710 Henry.aubut@Verizon.net
It's on the passenger side, above the kick plate.
Remove 1. Bolts retaining license plate lamp to bumper. 2. Socket from license plate lamp. 3. License plate lamp. 4. Bulb from socket. Install or Connect 1. New bulb to socket. 2. Socket to license plate lamp. 3. License plate lamp. 4. Bolts to retain license plate lamp to bumper.
=== ===
The Idle Air control valve is located on the side of the throttle plate.
There is supposed to be a license plate light on every vehicle manufactured since Moses' time.