check the wiring from front to back
Check the brake light switch on the brake pedal
When your foot puts pressure on the brake pedal there is a switch that relays the brake pedal being pushed to the lights which makes them turn on.
check fuses, check brake light switch behind brake pedal.
There is a brake light switch or stoplight switch that may be bad on the brake pedal up top.
faulty brake light switch (on pedal)
If you mean the brake lights are stuck on, then check the stoplight switch located on the top of the brake pedal.
Brake Light switch works without the ignition on. unplug the brake pedal switch and check to see if the brake lights are still on..switch could be defective
It is not necessarily the fuse. It could be the switch on the brake that is not closing the circuit.
There should be a switch under the dash activated by the movement of the brake pedal arm.
most likely the brake light switch burned out. you would find that switch on the brake pedal itself. easy to replace.easy way to test would be unplug it if the lights goes off you found the problem. u need to replace the stop light switch on the brake pedal
Defective or out of adjustment brake light switch, if the switch is mounted on the brake lever. If the switch is on the master cylinder, then it needs replacing.
When you step on the brake pedal, you close a switch at the top of the arm that holds the pedal. That puts power to the brake lights