Want this question answered?
96 dodge ram side rear view mirror will not stay in position
If you heat the mirror with a propane torch, you should be able to soften the glue and pick the mirror glass off. Get a replacement glass and silicone it on, using masking tape to hold it for 24 hrs. -- remove door panel, remove bolts to the mirror, (unclip wiring if a power mirror) replace.
how to replace passengerside outside mirror
remove wing mirror
Remove the inside door panel. Remove the wiring harness from the mirror. Remove the mirror retaining bolts. Reverse the process to install the new mirror.
For Manual adjust mirrors!Remove the plastic cover on the outside of the mirror with a knife.Undo the 2 Phillips screws that have been exposed.Remove the plastic round cover and rubber cover from the manual adjuster on the inside of the car.Remove the 2 7mm nuts, now exposed, from the maual adjuster.Pull the mirror off the car from the outside of the door.
To replace the driver's side mirror on the 2003 GMC Envoy, first remove the interior door panel. Then, remove the mirror connection cover inside the panel as well. Unscrew the screws holding the mirror to the door. Remove the wiring and replace the mirror with a new mirror. Replace the screws and place the door panel back onto the door.
If you go to www.automirrorglassonly.com it will tell you how to replace the mirror glass for the outside mirror. You can buy one there too. The outside mirror is just glued on , some parts stores sell replacement glass and you can glue the new one on
remove the plastic panel and there are 3 ten mm nuts remove and replace mirror.
If it is like the 99 SL then open the door, remove the black cover in the corner of the window on the inside. Remove the 3 nuts using 10mm socket, remove black cover, or mirror from the outside. Place new mirror from the outside, put nuts back on the 3 posts or bolts from the inside, replace black cover by firmly pushing back on and you are done. Hope this helps...good luck
remove the door panel, pull off the corner cover (it is held on by clips) and unbolt the window.
You need to remove the door panel to access the bolts and electrical for the mirror. To remove the door panel, it is all clips on the outside however there are 2 hidden bolts that you need to remove the cover from the door pull to access.