== == I had the same problem. The gas gage would go to zero when I hit half a tank. It turned out to be the kind of gas that I was using had high levels of sulfur. I switch to chevron with techron and the problem went away!
we had to replace the speed sensor in mine and it corrected the problem with the speedometer and the shifting. Good luck
Probably your thermostat has stopped working. I've had this problem several times.
May have replaced the wrong sensor or you have a bad wire in that curcuit. gm Jim
c1288 means you have a problem with your steering angel sensor
Temp. sensor my have stopped working. Quick and fairly easy fix.
It is possible that the temperature gauge has stopped working in a 1992 Tempo due to a blown fuse. It is also possible that the temperature gauge stopped working do to the temperature sensor in the engine having a short.
Corvette didnt have a Crankshaft Position Sensor until 96.
Check the speed sensor.
P0146Oxygen Sensor Circuit No ActivityUsually followed by some location information such as bank one sensor 2.It is an indication that the rear most Oxygen sensor has stopped working, or there is an electrical problem with the wiring going to that sensor.The solution is to replace the indicated O2 sensor.
I was having the same problem with my daughter's escort. I replaced the cam position sensor and the problem stopped. Advanced Auto Parts will check the computer to find out the problem for free. I was having the same problem with my daughter's escort. I replaced the cam position sensor and the problem stopped. Advanced Auto Parts will check the computer to find out the problem for free.
What type of sensor? The tire pressure sensor is located in the wheel.
The 1990 Chevrolet Corvette IAT sensor does have two wires. The sensor has a ground wire and a positive wire.