change your wiper switch located on the steering column
When purchasing windshield wipers that work intermittently, they can be any windshield wipers that are the correct size. The ability to work intermittently is a wiring/fuse ordeal. This does not play a part in the selection of windshield wipers that you choose from.
May need a new pig tail behind the ignition switch.
Ignition switch. Not the lock, the column mounted ignition switch.
Radio Heat Engine Windows Wipers
The advantage to interval wipers is increased safety if you experience fog or mist in your area. You can set the wipers up to wipe intermittently without having to remove your hands from the steering wheel
Intermittently is the term for stopping and starting, like windshield wipers that aren't going full blast.
The windshield wiper switch allows the driver to make the wipers work either continually or intermittently.
It is possibly your ignition switch. Jiggle the key slightly when the car is running and see if they work then.
It's a standard item. Located under the plastic trim under the windshield wipers. Park the wipers so they are up towards the top of the windshield by turning the ignition key off while the wipers are running, then remove the plastic nuts or screws that hold the black plastic trim and vent piece between the wipers. You will see the cabin air filter. It is rectangular.
leave the wiper stalk/control set down one stop from off when you switch off the engine, it will then work automatically when it rains and the engine is running
If the motor is turning, but the wipers are not moving, then you have a broken or disconnected linkage.
The windshield wiper switch is broken which is located on the windshield wiper motor. You need to replace the whole motor to fix this.