Same problem - bulbs are good but the driver side brake light will not operate. Also the horn stopped working at the same time.
Have vehicle scanned to determine problem
Probably because the light is burned out. It is pretty easy to change.
This light is trying to tell you that your brake fluid may be low. Check your brake fluid and fill if it needs it.
Start with checking the bulbs andthe fuse.
There is no brake fuse on the 2003 Venture. there is a EBCM/EBTCM. This module controls the ABS in your vehicle.
unhook the positive on the battery for 5 min. This should reset your check engine light if it doesnt then you still have issues.
If your Chevy Venture ABS light is on, that means that there is some type of problem with your anti-lock brakes. For the light to turn off, you will need to see a mechanic and have the problem looked at.
how to change third or center brake light on Chevy beretta 95
You will need to remove the 1998 Chevy Camaro brake light wiring harness. Remove the brake light retaining screws. Reverse the process to install the new brake light.
It is quite easy to install the 1992 Chevy Lumina brake light switch. The brake light switch simply plugs in and out.
On a 2000 I switched the backup light (which worked) into the brake light hole. It did not work. But brake light bulb in backup light hole worked. So that means it is NOT the bulb. Has to be sensor. I had problems with the taillights on a '99. Problem was the connector to the light assembly. I replaced the wiring harness connector using a junkyard replacement.
ABS stands for Anti-Lock Brake System. If the ABS light is on, your ABS has a problem. Clean all wheel sensors of any debris. If that does not help, Seek out a professional for this repair.