Want this question answered?
You beat the TRAINERS first then the doors unlock and you can go through them ^^
I have a 2008 Expedition Eddie B. Using the manual and the information center button and key you can program the doors to unlock when you open your door or park. Its in the manual.
The power seats and mirrors are programmed to each key remote the same as programmed to driver 1 or 2.
Go through the cave of origin.
To program the keyless entry remote on a Chevy Malibu, close all doors and put the key in the ignition. Hold down the power unlock button on the door while turning your key to on and off twice. Then release the power unlock button on the door.
To program a key fob for a 2009 Chevy Malibu, sit in the driver's side front will all the doors closed. Hold down the unlock button for the doors, then insert the key into ignition and turn to on. Release the door lock. Then press the key fob unlock and lock buttons, alternating between the two buttons for about 10 seconds. Turn the ignition to run when the door unlocks automatically.
With the doors unlocked, turn the ignition key on the 96 Bronco from of to run and back to off five times in ten seconds, ending in run position. The doors should lock then unlock, indicating the vehicle is in program mode. Press any button on the remote, and the doors should lock then unlock. The system should now be programmed and ready for use.
I think you have to push the 'unlock' button twice in order to unlock the doors.
You have to unlock the car doors for the filler cap door to unlock. This means ALL of the doors, not just the drivers.
It should unlock along with the doors It should unlock along with the doors It should unlock along with the doors IDK who this person is "it should unlock along with the door" whom ever posted this question I know your frustrated, me too. I have a SLk 230 1999 I have to manually unlock the doors and the truck My baby is on sit because I cant put gas in it... the doors are unlocked, the doors are unlocked
You have to press the unlock button 2 or 3 times to get both doors to unlock no programming needed
The original key has a chip that is programmed to start the vehicle. A copy key will unlock the doors but will not start the vehicle because it does not have a chip in it. If the copy DOES have a chip, it need to be programmed in order to start the vehicle. You may need a key with a security chip in it, check dealer