It means that there is a failure in the communication system between the computers on your truck, you will need to have it diagnosed with a scan tool.
You can not legally.
The odometer has failed.
That doesn't work on that vehicle.
It will say "Eco on" in the odometer box
AnswerI know on my 99 Ram 1500 you can reset the dash warning lights by having key off, then hold in the Odometer button. Then turn key to "ON" position. Hold the button in for about 5 seconds or till all 0s show on odometer. Then release. The dash will go thru a series of "checks" then go back to normal. This also works on an 03 Ram 1500 with a 4.7L eng.
check speedometer cable for possible disconnection; it comes out of firewall and goes to transmission
It will read up to 999,999 milesIt will read up to 999,999 miles
Yes, just be sure to swap the tire pressure sensors if you want the warning light to go out.
13.5-14.5 volts.
13.5-14.5 when running.
With a scan tool, or by turning the key on, off, on, off, on and watching the odometer display.With a scan tool, or by turning the key on, off, on, off, on and watching the odometer display.
If the abs light is on, then you might have a rear axle speed sensor issue. If not, then you have a cluster problem.