easier than you think .remove two press pins in end of door (one top,one bottom).Remove snap panel behind arm rest and removetwo screws with #15 torx driver. Remove outer snap panel around door handle. Use care and pry snap pins all around lower door panel( 6). Door panel will lift right off. Thanks this will also help a lot with the replacement of the rear window vent (quarter window)
Here's a great how to video that will show you how to properly remove the door panel on your 2005 Chevy Malibu. A link has been included below.
is 250 door panel removal
To access the speakers on a 2000 Malibu, you will need to remove the door panel. You also may need tools like screwdrivers and a wire cutter to take the door panel off. Before starting any removal of the panel, you should disconnect the negative battery cable.
Where is the blend door actuator located on a 2005 malibu
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
2003 Chevy silverado door panel removal diagram
what size door speakers are in a 2005 Chevy Malibu classic
Door Panels Removal & Installation 1. Remove the sail panel (Front Doors Only). 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc.The installation is the reverse of the removal.
http://www.ecoutez.net/boxster/door-panel-removal/panel-clip-removal-1.jpg
renault master door panel removal
you have to take the whole door panel off and get to it form that way
There is one black Philips screw holding it near the door lever. Additionally there are two more hex bolts hidden near the dead center of the door covered by a little panel painted the same color as the door skin. You will also have to remove the power window switch be able to pull the panel off. You'll have to give it some force to pull the panel off.