If E=I x R then it would require 1232 volts to push 16 amps through a 77 ohm resistance.
It depends on how many Amps (current) are applied to the voltage. Watt = Volts x Amps. e.g. 12 volts @ 5 amps = 60 watts
Milli amps is a measure of current whilst watt is a measure of power. The missing element is voltage as the formula is:- Power = Voltage * Amps ie power in Watts is the product of Volts (in Volts) times Amps (in Amps)
To convert watts into amperes you divide the circuit voltage into the watts. Amps = Watts/Volts. <<>> Converting Watts to Amps The conversion of Watts to Amps is governed by the equation Amps = Watts/Volts For example 12 watts/12 volts = 1 amp Converting Amps to Watts The conversion of Amps to Watts is governed by the equation Watts = Amps x Volts For example 1 amp * 110 volts = 110 watts Converting Watts to Volts The conversion of Watts to Volts is governed by the equation Volts = Watts/Amps For example 100 watts/10 amps = 10 volts Converting Volts to Watts The conversion of Volts to Watts is governed by the equation Watts = Amps x Volts For example 1.5 amps * 12 volts = 18 watts Converting Volts to Amps at fixed wattage The conversion of Volts to Amps is governed by the equations Amps = Watts/Volts For example 120 watts/110 volts = 1.09 amps Converting Amps to Volts at fixed wattage The conversion of Amps to Volts is governed by the equation Volts = Watts/Amps For Example, 48 watts / 12 Amps = 4 Volts Explanation Amps are how many electrons flow past a certain point per second. Volts is a measure of how much force that each electron is under. Think of water in a hose. A gallon a minute (think amps) just dribbles out if it is under low pressure (think low voltage). But if you restrict the end of the hose, letting the pressure build up, the water can have more power (like watts), even though it is still only one gallon a minute. In fact the power can grow enormous as the pressure builds, to the point that a water knife can cut a sheet of glass. In the same manner as the voltage is increased a small amount of current can turn into a lot of watts.
The voltage can be either 250000 kilovolts or 240 volts, it can't be both so the question can't be answered. <<>> There are zero amps in 250,000,000 volts. Amps can be found using the following equations. Amps = Volts/Resistance in ohms, Amps = Watts/Volts and Amps = Sq root of Watts/Resistance in ohms.
You cannot convert 2.6 kw to amps with that information only. In order to convert watts to amps, you also need to know either current or voltage. This is because watts is volts times amps, and volts is current times resistance
Amps and volts are not the same, but related by Ohm's Law. Volts = Amps x Ohms. Ohms is a measure of resistance. Given .01 amps you would have to know resistance to calculate volts.
Watts, Volts and Amps are interdependent, but unique units of electricity. The formula is: Watts = Volts * Amps A megawatt is just 1,000,000 watts. At 1 volt that would be 1,000,000 amps At 1,000,000 volts that would be 1 amp.
You would have to know either the value of Volts or Amps to calculate that. watts = volts x amps Without either of those values nothing can be done.
Amps are related to voltage in the following equation: Watts = Volts * Amps; so in order to answer your question, one would need to know the wattage.
Watts = Volts times Amps. Therefore, if the voltage was 220 volts, the motor would draw 500 amps. If the voltage was 4,000 volts, the motor would draw 27.5 amps. The voltages for large powerful motors tend to be relatively high, for example in the 380 Volts to 11,500 Volts range.
160 amps at 12v.
160 amps at 12v.
You have your own answer. It is 1.5 amps.
It depends on the voltage.Amps times volts equal watts
Ohm's law: Volts = Amps * Ohms, or Amps = Volts / Ohms 12 volts / 0.5 ohms = 24 amps
About 2.25 Amps.
4 volts and how many amps? Watts = amps x volts. It depends on the amount of current (in Amps) flowing at 4 Volts... See Ohms Law: Watts = Volts x Amps If you have 2 Amps flowing at 4 Volts you are dissipating/consuming 8 Watts. If you have 10 Amps flowing at 4 Volts you are dissipating/consuming 40 Watts.