# Disconnect the battery ground cable. # Remove the engine cover. # Remove the steering column to instrument panel bolts. Lower the column carefully. # Remove the upper and lower instrument panel attaching screws. Remove the radio support bracket screw. # Raise and support the right side of the instrument panel. # Remove the lower right instrument panel bracket. # Remove the vacuum actuator from the kick panel. # Disconnect the temperature cable and vacuum hoses at the case. Remove the heater distributor duct from over the engine hump. # Remove the two defroster duct to firewall attaching screws below the windshield. # Under the hood, disconnect and plug the heater hoses at the firewall. # Remove the three nuts and one screw (inside) holding the heater case to the firewall. # Remove the case from the truck. Remove the gasket for access to the screws holding the case together. Remove the temperature cable support bracket. Remove the screws and separate the case. Remove the heater core. # Reverse the procedure for installation. Refill the cooling system as necessary.
Drain the water from your 1972 Chevy Nova cooling system. Remove the heater core water supply hoses. Remove the heater core retaining bolts.
The Chevy heater hose removal tool is a plastic piece that clamps around the hose. The tool slides into the fitting to release the hose.
Need to know what year and model the truck is. 1992 Chevy k2500
On what?
Very. Requires removal of the dash for access.
How do i cange the heater core of a Chevy s 10How do i cange the heater core of a Chevy s 10
how do i change a heater core on a 2000 Chevy impalla
how to replace a heater core in a 1997 Chevy blazer
How do i remove a heater core to a 1974 chevy impala?
diagram for a 92 Chevy van g20 Heater core
Remove the water supply hoses from your 1985 Chevy heater core. Remove the heater core retaining bolts. The heater core will come out. Reverse the process to install your new heater core.
Detach the screw that attaches the heater duct on a Chevy Cavalier and remove the heater core. Once this is done you can replace the faulty heater core with a functional one.