0
97 Toyota T100 won't start wet plugs and spark Good compression?
Wiki User
∙ 16y ago
Check spark plug wires, distributor cap, and coil for cracks that let moisture in.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Why won't your 1997 Toyota 4 Runner start?
If it does not start it is missing either spark, fuel under the proper pressure , compression or the timing of the ignition or the camshafts are incorrect. Start by determining what is present, check for spark, proper fuel pressure, engine compression.
What are the symptoms of ignition coil failure in a Toyota land cruiser?
Same as any other car. No spark at the spark plugs, and car won't start.
How do you reset alarm on 1998 Toyota 4 runner?
The Toyota 4 runner will not start, it sounds like it is going to and it will not, the starter, spark plugs are fine?
Why will it not start even though you replaced the caprotor spark plugs and there seems to be no other apparent issue and it will turn over?
you need spark, fuel and compression. You are missing one of those.
Changed spark plugs now car will not start?
Check the terminals in boots are fully snapped on to ends of plugs. Also proper torque on plugs. Remeber if loose, thee is no compression & gases won't fire.
Why does a 1999 Chrysler Concorde misfire?
The Concorde could misfire for several reasons. Start by checking for proper fire to the spark plugs. Then check engine compression to see if a cylinder compression is down.
Why will my 1994 Toyota pickup will not start?
No spark, No compression, no fuel or timing off. Any or all of these could be an issue and then multipul reasons for each of them.
Why wont my Ford f150 1986 that doesnt start i changed timi ng chain magnetic module spark plugs wiring?
You need compression, fuel and spark. You are missing one of those.
How do you disengage fuel and spark for a compression test on a 1994 civic?
pretty much only way to stop the fuel, is if you have an electric fuel pump, you can remove fuel pump fuse.but you really dont need to do this for a compression test. in performing a compression test, you need to remove spark plugs to use compression gage. before you start, remove the lead that goes from distributor to coil, and you will not have spark at the plugs you can also use a remote stater switch connected to starter motor and leave ignition turned off. the engine will still turn but no ignition will be available to start engine
How to fix miss fire for Toyota Camry 1997?
I would start with replacing the spark plug wires and spark plugs (if you did not do that for a while). If does not help check the coils or distributor depending on what you have.
Why ford explorer won't start after changing spark plugs?
Obviously- the spark plugs were not the issue :)
Why would I smell gas when I try and start my Z24 but it just shutters and won't start?
one or more cylinders not firing Check plugs ..Check for spark ..Check compression JW
