heat not working
I have a 2000 Chrysler cirrus it only blows cold air on the heat cycle. can someone help me as to why this is happening?
It could possibly be a clogged heater core
pee on it
blower fan not working
If the heat is not working at all it could be your blower motor. If the heat is no longer hot then it could be your heater core, or you could simply be low on coolant. Mine was low for me to find out that I had an intake gasket leak, fixed it and now the heat works great.
i have a 93 accord with the same issue. i found that the control valve for the heater core was stuck close. i just opened it by hand and now i have heat
Possibly the Blower Motor has stopped working. This was the case in my 1994 Acura Legend. I just replaced it, and now the heat works great again!
THE COLD AIR WARM AIR EXHANGE DIVERTER DOOR IS NOT WORKING
that is because your A/A bulb isn´t working fine, just change it.
the fan is working but no heat
Honda had an issue with a run of clock modules. They are not bad, they get a cold solder joint on the back of the module. Remove the module from the dash, open it, and re-heat and solder the connections on the large ceramic resister on the back and reassemble it. It works every time.