Check fluid level in master cylinder
Make sure parking brake is fully released
Check Brake fluid level
I have a 1996 Tacoma 2.7L and my brake indicator light on the dash is always on. So- here's how to check what's wrong... Start truck, release parking brake, if light is on, push the parking brake handle in/towards dash, if light goes off then you have a bad spring (like my truck does) or the like on the parking brake handle. That's all. Sometimes when I drive, I push it in/light goes off and then the handle works it's way out again and the light comes back on.
Yes
Brake system warning light.....
2005 Toyota tacoma how to remove the brake rotor
How do I change the brake pads on Toyota tacoma 2007
how do i remove the brake rotors for a 2003 Toyota tacoma v6 2wd
Toyota did not build the Tacoma in 1994. 1995 was the Tacoma's first year.
you need a new brake pressure differential switch
Brake light switch is defective or needs adjustment.
the tacoma has calipers on front.
On my 1996 tacoma I do not have a gas light for low gas.
The break light coming on in your 1998 Toyota Tacoma Non-Prerunner might be due to a faulty braking sensor. It could also be the brake cylinder or slave cylinder causing the light to come on. The break fluid being full is a great place to start; check the brake slave cylinder next.
Short in the wiring or one of the tail light sockets is corroded or shorted out.