Cam markings at 3 o'clock position with top mark lined up with center of camshaft cover. Crankshaft cog stamped pointer lined up with cut-out at rear.
it has a timing chain. IT HAS A BELT !!
it has a timing chain. IT HAS A BELT !!
ford doesnt put timing marks on anything. u need a special cam gear alignment tool
Cam belt or timing belt on Ford Laser Liata needs to be changed every 100 000 kms. It is made of rubber with geared teeth on the inner surface.
The crankshaft cog has a mark that lines up with the back housing for No.1 TDC. The cam cog has two marks that are put in the 3 o'clock position, the one at 12 o'clock lines up with the center mark on the front of the cam cover.
The crankshaft cog has a mark that lines up with the back housing for No.1 TDC. The cam cog has two marks that are put in the 3 o'clock position, the one at 12 o'clock lines up with the center mark on the front of the cam cover.
yes
Chain
Where are the timing marks on the cam gear on ford 2.9 engine
Timing marks for twin cam 1.6L B6 engine. When crank pulley is at TDC on the compression stroke, 'E' & 'I' on the camshaft pulleys should be at 12 o'clock. Too easy.
chain
Both, timing belt from cam to diesel pump. Timing chain from cam to crankshaft.