Want this question answered?
It may work if the base is the same but it would only be half as bright.
The light bulb should still have the same limit - 100 watts, because the limit is set practically by how much heat they produce. You need to make sure the wiring in the chandelier is correctly insulated for the higher voltage.
25w
If the lamp bases are the same for a 220 volt bulb and a 110 volt bulb, then yes. If any modification to the pendent lamp have to be done then no, as field modifications to electrical equipment will null and void the certification that the manufacturer had to obtain to be able to sell the device.
The voltage must be adapted to whatever is the standard voltage in your city: either something close to 110V, or something close to 220V.
Yes, you'd have to change the plug or use an adapter, and also change the bulb. Thry make the standard "medium base" A19 bulbs in 220v also. here's a few: http://www.bulbs.com/Light_Bulbs/Medium_(E26)/200V+-/results.aspx
If it fits and the controlling ballast or electronics is compatible with the bulb type. The 240 volt socket rating is just and indicator of the maximum voltage that can be applied to the socket.
If you can use it in your lamp it will be a 20 watt bulb
This sounds like a household light socket you are inquiring about, replace the bulb and socket as well.
If all the components are rated to 220V, yes. Keep in mind that if the appliance was designed for 110V it may arc if 220 is run through it. If you don't know the device can handle 220V, don't run it at 220V. Chances are it was manufactured cleaply and cannot handle the extra voltage.
The screw socket into which an ordinary light bulb is inserted.
Remove brake light interior trim panels. Then you push and twist the socket for the brake light that needs replacing. Then pull out socket. then pull out bulb from socket and place new bulb in the light socket. Once bulb is installed into light socket. Place the socket where you removed it from brake light housing. Push and twist clockwise to lock back in place. Then replace trim panels.