It depends on what you are powering with the circuit, but probably not. The 1.5 amp fuse would blow in normal operation of the device.
No, the voltage rating should not be exceeded. However, you could use a 250v 10a fuse for a 125v 10a fuse.
No, it cannot.
No
125V
no.. it could damage your electrical components.
The voltage rating of a fuse (in this case 125V or 230V) defines the maximum circuit voltage that the fuse is safe to be used on. A fuse with a voltage rating of 125V should not be used in a circuit with a voltage greater than 125V. If a 125V fuse were installed in a 230V circuit and an overload current occurred, the fuse could explode.
No it will not work.
It depends on what you are powering with the circuit, but probably not. The 1.5 amp fuse would blow in normal operation of the device.
no
Yes
No, the voltage rating should not be exceeded. However, you could use a 250v 10a fuse for a 125v 10a fuse.
No, it cannot.
yes. the 250v just means that's the maximum voltage rating the fuse can handle .. so it can def handle 125v. just not vice versa.
No
125V
It is best to calculate on the side of caution, so I will assume you are talking about a 110V circuit, which can be anywhere from 105V to 125V. We'll assume 125V. So we're talking 5000W maximum load