no you idiot
Depends on whether it's a 305 or 350...
If the Buick 305 is really a Chevy 305, then the motor mounts will interchange with a Chevy 350.
5.0L is a 305. 5.7L is a 350
The headers for a 350 and 305 are the same.
If you are asking if you can substitute a 350 for a 305, the answer is generally yes.
Oldsmobile used Chevy 305's. 76 350 rocket 77 305 Chevy
Subtract 305 from 350 and that will give you the difference (or interval) between the two numbers:- the answer is 45. However, if you mean what is the difference between a Chevy 305 and a Chevy 350, then it is the difference between the engine bore (the cylinder) sizes. The 305 bore is 3.740 inches. And the 350 bore is 4.000 inches, giving the Chevy 350 20HP more then the Chevy 305.
No. The bore size is different between a 305 and 350. The 350 bore size is larger.
the block & heads are the same you just have to pull the 305 out & put the 350 back in
I believe the 305 TBI was in the RS models. the Z28 had 305 ad 350 TPI (tuned port injection)
No they are not.
no on a 350 it is on the driver side and on a 305 it is on the passenger side
it would be a 260 a 350 and 305 are Chevy motors
whats the question
Go for it
Yes. Its a direct bolt in.
Yes, you sure can.
There is no information on the internet about what the special feature of the Chevy 305 engine is, in fact, the Chevy 305 and 350 are interchangeable, one is just an older model.
The easiest way is to look at the Harmonic Balancer. The 305 has a wider thicker balancer than the 350. Pus the timing tab on a 305 is located ON the timing cover and the 350 is bolted on the with the cover bolts. Riky9
The cams interchange.