The dynamo exists in two types, or configurations. The first, the generator, delivers only Direct Current; while the second type, the alternator delivers just AC, or alternating current.
For the Dynamo to produce energy it must be turned. Water falling 1,000 feet down onto a turbines blades will spin the [attached] Generator. Steam has the same effect upon the blades of a turbine.
A steam burn is an example of latent heat, because beside the heat released by the steam itself, a part of it condenses, turning into water, which in turn releases heat too.
Not enough information to answer. Water does not do work when transformed into steam. Once it exists as steam, work can be done as it converts back to water. You will always get less out than you put in. The energy you put in is called the enthalpy of vaporization, (delta H), is also called heat of vaporization or heat of evaporation. The energy required to transform water from a liquid into a gas at atmospheric pressure is 40.68 kilojoules per mole 2260 kilojoules per kilogram. Energy is the ability to do work. Creating steam requires energy. Water does not do work when transformed into steam. Steam, after it is created, can do work and in the normal steam engine, it is then converted back to water. That process involves a few basic issues such as pressure, temperature change and entropy which are not available with the data provided.
No, steam is water as a gas.
the steam will give off a large amount of heat as it condenses.
No. Steam is warm water vapor. Heat is added or external energy that causes a rise in temperature.
Use the heat to boil pressurized water. Use the pressurized steam created to spin a turbine connected to a dynamo. The dynamo then produces electricity.
Use boiler to turn heat to potential energy in steam the run the steam through the turbine dynamo transform the energy in steam to electricity.
Use boiler to turn heat to potential energy in steam the run the steam through the turbine dynamo transform the energy in steam to electricity.
You burn the coal in a power station. The heat form the coal boils water and the pressure from the steam coming from the boiling water is used to turn the rotors of a dynamo. The dynamo makes the electricity.
Steam boilers work by boiling water to generate steam. The steam then is used to heat the engine.
All current power reactors are no different than coal or oil power plants, they make heat, the heat turns water to steam, the steam turns turbines, the turbines turn alternators. You have electricity. Just the source of the heat changes.
The steam flows through a grill of pipes and the heat radiates from the pipes to the room.
Yes. Heat engines come in various forms. For example, internal combustion using gasoline or diesel, external combustion (not much used), steam engines reciprocating or turbine, gas turbines, rocket engines.
To convert heat energy into mechanical work.
If you have hot water heat or steam heat, it will still work. Gas or electric heat has nothing to do with the water system.
they convert mechanical energy into electricity.
I assume you're asking about a natural gas fired plant. The gas is burned to heat water and produce steam. The steam is piped to a steam turbine causing the turbine to spin rapidly. As the steam does work on the turbine, its temperature drops. The turbine is connected by a shaft to an electrical generator. The spinning generator converts this mechanical energy into electrical energy by moving magnets through conducting wires. This produces an electric field which pushes electrons through the wires.