Remove the door panel. Find the track, for the passage window, loosen the track and put the glass, back in track. Put the track, back in track, and tighten it down. Put your door panel back on, and your ready to go.
If the zipper is separated from the top fabric you can sew it back on, but if the zipper puller is separated you can order a new one as a zipper repair kit and put a new one on there, the stopper for the bottom is included in the kit so it wont come off again. The process of getting that new puller on there can be a bit frustrating so be patient. There is a guide at the bottom of each zipper track, the easiest way to get the new one on is to remove that guide ( what you put the two sides into to start zipping it up ). then start in the fabric and run the new puller up the top side ( not window side ) of the zipper, then replace the guide. ( cripms on ) then it should work as normal.
take the code off you put on when you wanted the about me hidden.
the trick is to unclamp the top from the windshield first, get some slack in the top, you may even need to unclamp or unvelcro around the doors, then go to the back, pull down on the top and begin to zip. if you have the single continuous zipper, it will be easy, if you have the 3 zipper one, do the top zipper first then the side ones.
you need a window regulater you can not just put on track and it can cost some money
To put a passenger side window back on track on a Ford Expedition you should first carefully remove any old silicone. Next put the window back on track, and use Gorilla glue or silicone to secure it. Do not put the window down for at least 24 hours.
To set the power window back on track in a Ford Focus, you have to remove the door panel. Once you get in there, you will see the track that you will need to put the window back on.
Remove the inside door panel. The entire window mechanism will be visible. Put the window back onto the window track.
You can put a manual rollup window back on track, in your 1994 Chevy Cavalier, by removing the inside door panel. The window track is easily visible with the door panel removed.
By pushing the button downwards
you cannot put the window "back on track" the window regulator failed and will need to be replaced, good luck. What kind of lame answer is that? Yours might have been - not everybodies is.
Solid candle wax.