No you will have to use one or the other. In order to use more devices you will have to install a router to your modem.
AnswerIt depends on the modem, some will let you use both ports simultaneously, while others won't. If you do have a modem that will run both, your ISP (cable/dsl company) will usually charge you a fee between $3.00 to $10.00 for accessing more then one dynamic/static IP, one for each port on the modem. So again your best bet is to get a router.
AnswerConnect one to the the Net then use windows internet sharing system ISS to share the link betwen the two systems. Use a wireless 802.3 connection or a second NIC on the ISS system to the cable modem and then connect the USB computer and "bridge" or ISS the two sub nets together witout a router!
__________________
Answer
Yes, I try this on my server & client PC's is this possible.when we connect one modem on two PC at same time it work, but when we connect two interface at one PC of separated two lan how can configure that?
It is possible to use two default getway on single PC?
An internet cable (Ethernet).
Not exactly sure what your asking but, an "Ethernet Switch" will connect all the computers together and then any computer can access any computer. If you have 10 computers you would need at least one 10 port Ethernet Switch to connect them all. If you mean one computer "controls" all the computers then you would have to buy a software program for that.
The single connection all NIC cards usually have is an RJ45 jack. This allows for Ethernet cables to be readily connected.
there is no limit of computers.. it depends on the local access network network's strength, capability.
All the components needed to connect 2 computers together are two Ethernet cards, a network switch and 2 Ethernet cables. Alternatively a single USB transfer cable can be used for simple file transfers.
Install a switch.
A 4-port WiFi router is just a router that has four WIRED ethernet ports in addition to its WIRELESS 802.11 interface. This would allow you to share a single WIRED internet connection between 4 computers using ethernet cables, in addition to many other computers using the WiFi interface and no cables.
A computer cluster is a set of loosely or tightly connected computers that collectively control a larger machine. The set of computers can all be viewed on a single monitoring system.
Routers do not require presence of other computers to work. You can have even a single router in your network with no computers connected and will still work.
To extend a network, Ethernet cable splitters, hubs, and network switches can all be used. Each of these devices has its own set of advantages and disadvantages. We'll go into how each of these useful tools works, how they vary from one another, and how to use them effectively in this guide.
It made computers work a lot faster and for helping develop the Ethernet controller chip that made the Internet possible.
Yes; Ethernet is really not a single technology, but a family of technologies. Details vary, for example between fiber optic and copper cable; but it is still considered "Ethernet".Yes; Ethernet is really not a single technology, but a family of technologies. Details vary, for example between fiber optic and copper cable; but it is still considered "Ethernet".Yes; Ethernet is really not a single technology, but a family of technologies. Details vary, for example between fiber optic and copper cable; but it is still considered "Ethernet".Yes; Ethernet is really not a single technology, but a family of technologies. Details vary, for example between fiber optic and copper cable; but it is still considered "Ethernet".