Glucose will caramelize if you autoclave it on a cycle that runs more than 15 minutes. However you may still get a brown tinting of the media.
Glucose is the solute; water is the solvent.
A 30% glucose solution is purely glucose and water, though it is actually impossible to keep other contaminants out of it. To create a 30% solution of glucose, you take a fixed volume of water and add 30% of that value of glucose to the water. The amount of glucose is in grammes. For example, 3g of glucose would be added to 10ml of water.
SDS solution should not be autoclaved. Moreover any other solution containing SDS should not be autoclaved too. Because SDS will cause boil over of the solution.
To prevent color formation during autoclaving of amino acids and 10 percent glucose, some measures can be taken. Firstly, ensure that the amino acids and glucose are stored in a cool and dark place to minimize exposure to light and heat. Secondly, try to minimize the autoclave temperature and duration, as high temperatures and prolonged exposure can contribute to color formation. Lastly, consider using opaque or amber-colored containers for storage and autoclaving to further protect the substances from light.
You can prove there is glucose in a sample by using Benedict's Solution. Heat up the sample, and add the Benedict's Solution. Assuming the solution is clear, if glucose is present it will change colour to red, or yellow, or green. If not, it will stay clear.
Not if the solution contained only glucose and water.
Its a mixture!
the solution in the balloon is hypertonic relative to the solution in the breaker. is this true
Glucose is the solute; water is the solvent.
Isotonic solution is very close to sea water in composition and also concentration. Glucose isotonic solution is an electrolyte solution used for re-hydration. It contains salt, water and glucose.
A 30% glucose solution is purely glucose and water, though it is actually impossible to keep other contaminants out of it. To create a 30% solution of glucose, you take a fixed volume of water and add 30% of that value of glucose to the water. The amount of glucose is in grammes. For example, 3g of glucose would be added to 10ml of water.
SDS solution should not be autoclaved. Moreover any other solution containing SDS should not be autoclaved too. Because SDS will cause boil over of the solution.
Glucose is not an electrolyte in solution.
Assuming that is is a solution of glucose in water, the answer is 93%.
Water will diffuse from solution B to solution A
Glucose concentration strips will work.
Glucose is a simple sugar or monosacharide. It may be presented as a white powerder or solid, or in solution with sterile water.